VentPro : Reduced Maintenance Nickel Cadmium Batteries for Stationary Applications
A new reduced maintenance Nickel Cadmium battery developed by HBL for high temperature stationary power backup applications.
The major design improvements of this reduced maintenance battery are,
90% capacity is available even at +400C after constant charge at 1.43 V/cell in 15 hours with a charge current of 0.1 C5 A.
Top-up only once during its life time under recommended operating conditions.
The construction is based on conventional pocket plate technology by introducing special features to enhance the low water usage, giving extended service life and outstanding performance specially when operating at high temperature.
The active materials are encapsulated between folded steel strips, which are perforated on both sides, thereby increasing the effective surface area and making battery more efficient. These batteries use a special separator, which allows gases generated during charging to recombine inside the cell thus ensuring minimal water loss. This concept enables the batteries exceeding the gas recombination requirements defined in IEC 62259. In normal conditions, VentPro battery shall have only one topping up with water in its total service life.
The VentPro batteries are available in tough, shock resistant, fusion welded polypropylene cell containers and lids.
HBL's VentPro batteries are supplied with electrolyte, inter-cell connectors, related hardware and accessories required for normal operation and maintenance. Steel racks can also be offered along with batteries.
Superior Features :
Proven pocket plate reliability with lifetime of >20 years and high resistance to failure.
Special fiber separator to improve recombination and reduce water consumption.
VentPro's controlled recombination rates eliminate risk of thermal runaway.
Specially designed low pressure vent caps.
Batteries conform to IEC 62259 standard.
The VentPro batteries are available in a choice of plate types, which are designed specially for applications.
L type cells : 15 Ah to 1680 Ah.
For low discharge rate applications between 3 hours to 100 hours.
Oil and gas.
M type cells : 7 Ah to 1340 Ah.
For medium discharge applications between 30 minutes to 3 hours.
Instrumentation & Process control.
For inquiry please send email to firstname.lastname@example.org.